Micromax A65 Smarty 4.3 is a new-age
Android smartphone which supports Dual
SIM. The device runs comes with 1 GHz
processor along with 512 MB RAM and it
runs with the Android 2.3.5 Gingerbread
operating system. The smartphone is
powered with 4.3 inch 480×800 touch
screen display and it has a 2 mega pixel
camera. All in all, the Micromax A65 is a
wonderful smartphone for people with
low-budget.
If you own Micromax Smarty 4.3 A65
Smartphone and would like to gain root
privileges for either installing rooted apps
or for installing custom ROM firmwares,
then the following tutorial will help you.
Using this tutorial, you can root Micromax
A65 quickly and effectively.
WARNING: There may
be a possibility that
your Micromax A65
smartphone might get
bricked, while following
this tutorial. If it
happens, we shouldn’t
be held responsible at
all. Proceed at your
OWN RISK.
Prerequisites To Root
Micromax A65 Smarty
1) Take a complete backup of your
personal data in your smartphone using
appropriate apps. We can always use this
to restore your data if incase all your
mobile data gets wiped out.
2) Ensure that your device has a good
battery backup. If you phone gets switched
off due to lack of support while the
rooting process is going on, it will surely
get bricked. So charge your device battery
before starting the rooting procedure.
3) downlode micromax a65 usb driver and install it on your
computer.
4) Enable “ USB Debugging” as well as
“Install From Unknown Source” options
by visiting developer settings.
Once done, we can get started with the
rooting process.
Tutorial To Root
Micromax A65:
1) The first step in rooting process is
unlocking the Boot IMG. To do that,
download insecure boot.img , downloader
tool and drivers, and stock firmware .
Once download install the downloader tool
and drivers on your computer. Also, if you
are using Windows 7, download driver
signature enforcement overrider and
install it. Or if you are using Windows XP,
download virtual box and install it on
your PC.
2) Once done, open your device manager
and make sure that you don’t have yellow
sign showing up on ABD interface, the two
COM ports and the two emulators
3) Now open research download in your
computer and click on the first button.
Once the new windows open, load the PAC
file. Now click on the second button and
change the Baudrate to “ 115200“. Once
done, select the unlocked boot.img which
you have downloaded and saved in your
computer for BOOT_IMG option.
4) Now select the Calibration tab and
uncheck all the files. Once you have done
it, plugin the USB Cable (not your phone,
just the USB cable). Now click on the Play
button.
5) Once you have done the above step,
press the “Volume Up” key of your
Micromax A65 and while holding it,
connect it to the computer with the USB
cable.
6) Don’t release the Volume Up Key until
you the download message which starts
usually within three seconds. If not, check
your driver installation and retry the step.
Once you see the download gets complete,
disconnect it from computer and remove
its battery for few seconds. Now reinsert it
and restart your device. That’s it. Now you
successfully unlocked your Micromax
smartphone boot.img.
7) Since the boot.img is successfully
unlocked, we can easily root your device.
To get started, download Unlockroot and
install it on your computer.
8) Now connect your Micromax A65
smartphone using the “USB Mass Storage ”
option. Once you have successfully
connected your device, the unlockroot will
identify it and it will show the “Root Now”
button. Just click on it.
9) You will be prompted with a “Install
Battery Saver App ” message. Just ignore
it and wait for the rooting process to
begin. Once the rooting process gets
completed, reboot your device.
That’s it! Now you have successfully
finished rooting Micromax A65
smartphone. You can use the “Root
Checker” app to check whether your
device is rooted successfully or not
my more blog and web saite
Web saite : Trickshub
Blog : Roking tricks
Blog :free recharge tricks
Support :facebook
